How to turn off Kyocera sleep and power rules
- [System Menu/Counter] button/key > [Date/Timer/Energy Saver]
- Sleep rules
- Power Off Rule
OLDER PRINTERS
To turn off the Network sleep rule
- Press the Menu button
- Navigate to Device Common and press OK
- Navigate to Timer Setting and press OK
- Login
- Navigate to Sleep Level Set and press OK
- Navigate to Status and press OK
- Navigate to Network and press OK
- Select Off and press OK
To turn off the Network power rule
- Press the Menu button
- Navigate to Device Common and press OK
- Navigate to Timer Setting and press OK
- Login
- Navigate to Power Off Rule and press OK
- Navigate to Network and press OK
- Select Off and press OK
NEWER PRINTERS
- SLEEP TIMER - Set amount of time before entering Sleep. (1 to 120 minutes)
- ENERGY SAVER RECOVERY LEVEL - Select the method of recovery from energy saver
- FULL RECOVERY - This mode enables the use of all functions immediately. However, this mode saves less energy.
- NORMAL RECOVERY - In this mode, you can select the method from the following:
- enabling the use of all functions immediately or enabling the use of desired functions only.
- If you want to use all functions immediately, select the [Energy Saver] key to execute recovery
- POWER SAVER RECOVERY - This mode enables the use of desired functions only. This mode saves energy most effectively.
- POWER OFF RULE (EUROPEAN MODELS) - Select whether or not the machine enters Power Off mode for the following function. Select [On] to set the Power Off mode.
- Network
- FAX*1
- USB Cable
- USB Host
- RAM Disk
- NIC*2
- Remote Diagnostics*1
- Application
- Value: Off, On
- NOTE - Even when any of the functions is set to [On], if [FAX] is set to [Off], the machine does not enter Power Off Mode.
- Even when [Network] or [USB Cable] is set to [Off], if the machine does not communicate with the other devices, the machine will enter Power Off Mode.
*1 Only on products with the fax function installed.
*2 Displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed.