We sell and repair office printers in West Sussex, East Sussex, Kent & Surrey

Labour Costs

Call out from £33.00

SEE CALL OUT ZONES

On site Labour

1/2 HOUR  £45.00

Workshop Labour £10/10 MINS

All prices subject to VAT

Quickstream Ltd T/A Digital Office Solutions

Unit 5 Hyders Farm,

Bonnetts Lane,

Crawwley,

RH11 0NY

Telephone 01293 326406

Director J Waters

Company Reg No 04193475

Operating hours

Monday - Friday

9.00am - 5.30pm

Xerox Phaser 6600 repairs and servicing

     "Eddie can fix IT!

Xerox Phaser 6600 Models:-

• Xerox Phaser 6600N
• Xerox Phaser 6600DN

• Xerox Phaser 6600 Supplies and Spare Parts

Xerox Phaser 6600 local mobile on site repairs and servicing

Mobile on-site Xerox Phaser 6600 printer repairs and servicing across West Sussex, East Sussex, Surrey and Kent.

Xerox Phaser 6600 Specification

• Introduction Date: Introduction Date 09/2012
• Toner Cartridge Yield, Black: Toner Cartridge Yield, Black Estimated 3,000 @ 5%
• Toner Cartridge Yield, Color: Toner Cartridge Yield, Color C/M/Y: Estimated 2,000 @ 5%
• Toner Yield (Hi-Capacity), Black: Toner Yield (Hi-Capacity), Black Estimated 8000 @ 5%
• Toner Yield (Hi-Capacity), Color: Toner Yield (Hi-Capacity), Color C/M/Y: Estimated 6000 @ 5%
• Drum Yield, Black: Drum Yield, Black Estimated 60,000 Pages
• Drum Yield, Color: Drum Yield, Color C/M/Y: Estimated 60,000 Pages
• Waste Toner Container Yield: Waste Toner Container Yield Estimated 30,000
• Pages per Minute, Black: Pages per Minute, Black 36
• Pages per Minute, Color: Pages per Minute, Color 36
• Monthly Duty Cycle: Monthly Duty Cycle 80,000.00 Impressions
• First Page Print Time: First Page Print Time 10 sec color/9 sec black
• Two-Sided Printing: Two-Sided Printing Auto

Xerox Phaser 6600 Paper Jams

Paper jams are usually associated with either paper feed issues or the fuser unit

• Paper feed issues, we carry in stock new Xerox Phaser 6600 paper feed tires to replace worn tires. When tires are worn they can leave a grey smudge on the top sheet of paper in the paper tray, this is caused by the worn roller slipping on the paper. Paper feed issues are synonymous with the jam indicator coming on but no paper being found in the printer.
• Fuser jams - the fuser unit is similar to an old fashioned mangle, with its rollers being heated to 200’ centigrade. The heat roller is covered with a Teflon film to prevent toner sticking to it. When the fuser film wears the Teflon allows the Toner to stick to it, this will cause paper jams. Fuser unit jams can result in concertinaed paper being found in the machine.

If your Xerox Phaser 6600 is jamming we carry in stock new paper feed tires and fuser units, we can attend site and rectify your jamming issues for you.

Call 01293 326406 or email sales@dos-crawley.co.uk to place a service call

Back to the top

Xerox Phaser 6600 Print Quality Issues

Print quality issues can caused by several factors

• Poor quality consumables, toner cartridges can develop faults leading to print quality issues. Compatible cartridges give even more issues, make sure you purchase good quality consumables from a reputable source, we warrant our compatible cartridges for use in Xerox Phaser 6600 printers.
• The Xerox Phaser 6600 uses seperate drum units, these wear and will give issues with print quality.
• Contamination of the laser mirrors will lead to poor print quality, we can strip and clean your Xerox Phaser 6600 printer optics.
• The Xerox Phaser 6600 is prone to contamination of the Waste toner system on the Transfer Belt, as the name implies the Xerox Phaser 6600 Transfer Belt combines black, cyan, magenta and yellow images on the belt to produce a full Color image. This is then transferred to the paper by the Secondary Transfer Roller, issues with the Transfer System will usually give smeared or banding issues. We can repair your Xerox Phaser 6600 if it develops a Transfer Belt issue.

Back to the top

Xerox Phaser 6600 Common fault codes

Fault Code 062-380:- Abnormality detected in Laser Unit, replacing the Laser Unit is a very big job, for customers experiencing this fault in the past, we have swapped the clients consumables into a refurbished Xerox Phaser 6600 body, which proves quicker and cheaper than a lengthy repair to their own machine.

Fault Code 062-380:- Insufficient Lamp Brightness was Detected When Performing AGC - We have refurbished scanner, document feeder assemblies we can fit a refurbished unit to resolve this error.

We offer on-site local Xerox Phaser 6600 printer print quality repairs in West Sussex, East Sussex, Surrey and Kent.

• How To Configure and Connect the Xerox Phaser 6600 to a Wireless Network

We have mobile service engineers who can carryout on-site Xerox Phaser 6600 printer repairs and servicing across West Sussex, East Sussex, Kent and Surrey call 01293 326406 or email sales@dos-crawley.co.uk to place a service call

Eddie can fix IT!

Call 01293 326406 or email sales@dos-crawley.co.uk to place a service call

Back to Xerox Printer Repairs index

Xerox Phaser 6600 Repair

Xerox Phaser 6600 local on-site, service, servicing, repair, repairs. maintenance, jamming, fix, mend, maintainer

Xerox Phaser 6600 mobile local on-site, service, servicing, repair, repairs. maintenance, jamming, fix, mend, maintainer, in the following towns Worthing, Littlehampton, Chichester, Petworth, Horsham, Crawley, Guildford, Woking, Brighton, Burgess Hill, Haywards Heath, East Grinstead, Edenbridge, Oxted, Reigate, Redhill, Purley, Dorking, Leatherhead, Sutton, Epsom, Kingston,

Xerox Phaser 6600 mobile local on-site, service, servicing, repair, repairs. maintenance, in the following towns Worthing, Littlehampton, Chichester, Petworth, Horsham, Crawley, Guildford, Woking, Brighton, Burgess Hill, Haywards Heath, East Grinstead, Edenbridge, Oxted, Reigate, Redhill, Purley, Dorking, Leatherhead, Sutton, Epsom, Kingston,