We sell and repair office printers in West Sussex, East Sussex, Kent & Surrey

Labour Costs

Call out from £33.00

SEE CALL OUT ZONES

On site Labour

1/2 HOUR  £45.00

Workshop Labour £10/10 MINS

All prices subject to VAT

Quickstream Ltd T/A Digital Office Solutions

Unit 5 Hyders Farm,

Bonnetts Lane,

Crawwley,

RH11 0NY

Telephone 01293 326406

Director J Waters

Company Reg No 04193475

Operating hours

Monday - Friday

9.00am - 5.30pm

Xerox VersaLink B7030 repairs and servicing

Xerox VersaLink B7030 Models:-

• Xerox VersaLink B7030N
• Xerox VersaLink B7030DN

• Xerox VersaLink B7030 Supplies and Spare Parts

• Xerox VersaLink B7030 Printer repair maintenance, servicing, routine maintenance
• Xerox VersaLink B7030 Fault code diagnosis, repair
• Xerox VersaLink B7030 Printer repairs installed, relocated
• Xerox VersaLink B7030 network installation, setup, issues resolved
• Xerox VersaLink B7030 scan to email setup programmed
• Xerox VersaLink B7030 poor print quality resolved, repaired, fixed
• Xerox VersaLink B7030 Printer repair paper jams repaired
• Xerox VersaLink B7030 end of life component replacement ie Drums, ITB Belts, Fuser Units, Transfer Rollers

Xerox VersaLink B7030 local mobile on site repairs and servicing

Mobile on-site Xerox VersaLink B7030 printer repairs and servicing across West Sussex, East Sussex, Surrey and Kent.

Xerox VersaLink B7030 Details:

The Xerox VersaLink B7030 is a multifunctional machine with the ability to copy, print, and scan from the start. There is an option to add fax features, if needed. Ethernet connectivity is standard and there is the option to add wireless too.Warm up time is quick with first copies delivered in as little as 5.4 seconds. Multiple copies are output on the Xerox VersaLink B7030 at a rate of 30 pages per minute.

There is the option between a standard black toner (106R03393) and high-yield black toner (106R03394) that will supply approximately 15,500 pages vs. 31,000 pages at 5 percent coverage. With a robust monthly duty cycle recommendation of 15,000 pages, the Xerox VersaLink B7030 is able to keep up with heavy workloads.

Xerox VersaLink B7030 Specifications:

• Introduction Date: Introduction Date 05/2017
• Toner Cartridge Yield, Black: Toner Cartridge Yield, Black Estimated 15,500
• Drum Yield, Black: Drum Yield, Black Estimated 80,000 Pages
• Monthly Duty Cycle: Monthly Duty Cycle 129,000.00 Impressions
• Recommended Monthly Volume: Recommended Monthly Volume 15,000.00 Impressions
• First Page Print Time: First Page Print Time 5.4 sec

Xerox VersaLink B7030 Paper Jams

Paper jams are usually associated with either paper feed issues or the fuser unit

• Paper feed issues, we carry in stock new Xerox VersaLink B7030 paper feed tires to replace worn tires. When tires are worn they can leave a grey smudge on the top sheet of paper in the paper tray, this is caused by the worn roller slipping on the paper. Paper feed issues are synonymous with the jam indicator coming on but no paper being found in the printer.
• Fuser jams - the fuser unit is similar to an old fashioned mangle, with its rollers being heated to 200’ centigrade. The heat roller is covered with a Teflon film to prevent toner sticking to it. When the fuser film wears the Teflon allows the Toner to stick to it, this will cause paper jams. Fuser unit jams can result in concertinaed paper being found in the machine.

If your Xerox VersaLink B7030 is jamming we carry in stock new paper feed tires and fuser units, we can attend site and rectify your jamming issues for you.

Call 01293 326406 or email sales@dos-crawley.co.uk to place a service call

Xerox VersaLink B7030 Print Quality Issues

Print quality issues can caused by several factors

• Poor quality consumables, toner cartridges can develop faults leading to print quality issues. Compatible cartridges give even more issues, make sure you purchase good quality consumables from a reputable source, we warrant our compatible cartridges for use in Xerox VersaLink B7030 printers.
• The Xerox VersaLink B7030 uses seperate drum units, these wear and will give issues with print quality.
• Contamination of the laser mirrors will lead to poor print quality, we can strip and clean your Xerox VersaLink B7030 printer optics.
• The Xerox VersaLink B7030 is prone to contamination of the Waste toner system on the Transfer Belt, as the name implies the Xerox VersaLink B7030 Transfer Belt combines black, cyan, magenta and yellow images on the belt to produce a full Color image. This is then transferred to the paper by the Secondary Transfer Roller, issues with the Transfer System will usually give smeared or banding issues. We can repair your Xerox VersaLink B7030 if it develops a Transfer Belt issue.

Xerox VersaLink B7030 Common fault codes

Fault Code 062-380:- Abnormality detected in Laser Unit, replacing the Laser Unit is a very big job, for customers experiencing this fault in the past, we have swapped the clients consumables into a refurbished Xerox VersaLink B7030 body, which proves quicker and cheaper than a lengthy repair to their own machine.

Fault Code 062-380:- Insufficient Lamp Brightness was Detected When Performing AGC - We have refurbished scanner, document feeder assemblies we can fit a refurbished unit to resolve this error.

We offer on-site local Xerox VersaLink B7030 printer print quality repairs in West Sussex, East Sussex, Surrey and Kent.

Xerox VersaLink B7030 Printer Offline - Network connection issues

Xerox VersaLink B7030 printer offline, unable to connect, our engineers can diagnose and resolve physical connection issues and driver related issues.Our engineers carry wireless print servers, network switches and a wide assortment of USB and Ethernet cables.

We can resolve multi-function printers to scan, scan to email or folder related issues.

Xerox VersaLink B7030 Installation

We offer on-site local Xerox VersaLink B7030 printer installation in West Sussex, East Sussex, Surrey and Kent. Even if you purchased your Xerox VersaLink B7030 elsewhere, we can assist in its installation. Our Xerox trained engineers can install your Xerox VersaLink B7030 for use with Apple and Microsoft operating systems.

Our engineers carry wireless print servers, network switches and a wide assortment of USB and Ethernet cables.

We can set up multi-function printers to scan, scan to email or folder.

We have mobile service engineers who can carryout on-site Xerox VersaLink B7030 printer repairs and servicing across West Sussex, East Sussex, Kent and Surrey call 01293 326406 or email sales@dos-crawley.co.uk to place a service call

Eddie can fix IT!

Call 01293 326406 or email sales@dos-crawley.co.uk to place a service call

Back to Xerox Printer Repairs index

Xerox VersaLink B7030 Repair

Xerox VersaLink B7030 local on-site, service, servicing, repair, repairs. maintenance, jamming, fix, mend, maintainer

Xerox VersaLink B7030 mobile local on-site, service, servicing, repair, repairs. maintenance, jamming, fix, mend, maintainer, in the following towns Worthing, Littlehampton, Chichester, Petworth, Horsham, Crawley, Guildford, Woking, Brighton, Burgess Hill, Haywards Heath, East Grinstead, Edenbridge, Oxted, Reigate, Redhill, Purley, Dorking, Leatherhead, Sutton, Epsom, Kingston,

Xerox VersaLink B7030 mobile local on-site, service, servicing, repair, repairs. maintenance, in the following towns Worthing, Littlehampton, Chichester, Petworth, Horsham, Crawley, Guildford, Woking, Brighton, Burgess Hill, Haywards Heath, East Grinstead, Edenbridge, Oxted, Reigate, Redhill, Purley, Dorking, Leatherhead, Sutton, Epsom, Kingston,